ArtiBattery-101-Battery-Tester-Diagnostic

TDAB

ArtiBattery 101 12V Battery, Charging and Starting System Tester

$53.99

ARTIBATTERY 101

TDAB

The TOPDON TDAB digital battery analyzer tests cranking and charging systems for automotive batteries including ordinary lead-acid batteries, gel batteries, AGM flat plate, and spiral batteries.

Polarity reverse connection protection enables the vehicle battery tester to work safely without damage from a reverse connection.

The TOPDON car battery tester is compatible with the majority of battery testing standards - CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB. This vehicle battery tester supports English, Japanese, Russian, Spanish, French, and German.

FEATURES

The TOPDON ArtiBattery 101 uses advanced conductance measurement technology to test all 12V batteries in passenger cars and light trucks. It will accurately test battery health including voltage, cranking power, state of charge and more
READABLE TEST RESULTS: This battery tester displays five easy-to-understand battery test results; ‘Good Battery’ / ‘Good Battery, Needs Recharge’ / ‘Replace, Life Cycle’ / ‘Replace, Bad Cell’ / ‘Charge, Retest’. You can know the complete health status of any vehicle’s battery with one simple test
COMPREHENSIVE COVERAGE: The ArtiBattery 101 works on almost all battery types including Lead Acid, AGM Flat Plate, Spiral Plate, and Gel batteries for quick and accurate diagnosis. This tester also covers all battery system standards including CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB
SAFE & EASY TO USE: This battery analyzer is designed with reverse polarity protection to avoid damage to the battery or the tester
In-Depth Battery Testing - Battery Test displays SOH (State of Health), SOC (State of Charge), Voltage, Current, Rating, and analysis results on the LCD screen

Different Battery Test Results Explained:

Good Battery: The battery is in good condition
Good, Recharge: It’s a good battery with low current, recharge it before next use
Replace: The battery is almost or already broken, and you should replace the battery
Bad Cell, Replace: The battery is broken, internally damaged or has short circuit and it’s time to replace the battery
Charge-Retest: An unstable battery should be recharged and retested to avoid errors. If the same test result appears again, the battery is regarded as damaged. Replace the battery

Cranking System Test:

Select the cranking test and start the engine when prompted, then the tester will automatically complete the test
The tester will display the result including actual cranking voltage and actual cranking time
If cranking voltage is lower than 9.6V, the cranking system is regarded as abnormal
If cranking voltage is higher than 9.6V, the cranking system is ok

Charging System Test:

Charging Voltage: Normal – the generator output is normal, no problems detected
Charging Voltage: Low – check the drive belt of the generator and the connection between generator and battery, or follow the manufacturer’s guidelines to eliminate the generator fault
Charging Voltage: High – replace the generator assembly or a regulator to avoid battery damage
No Voltage Output – check the generator connection and the belt
Diode Test – there is at least one diode that is damaged if the ripple voltage is too high.

Notice:

Voltage test range: 8-16 VDC

SPECIFICATIONS

Display: 220*176 LCD
Acid-proof plastic with silica gel buttons
CCA: Cold Cranking Amps (Range: 100~2000)
BCI: Battery Council International (100~2000)
CA: Cranking Amps (100~2000)
MCA: Marine Cranking Amps (100~2000)
JIS: Japan Industrial Standard (26A17~245H52)
DIN: German Auto Industry Committee (100~1400)
IEC: Internal Electrical Technical Commission (100~1400)
EN: European Automobile Industry Association (100~2000)
SAE: Society of Automotive Engineers (100~2000)
GB: China National Standard (30Ah~200Ah)